Artículos > Buscar en Metadatos > TRIGENERACIÓN CON CICLO COMBINADO, CLIMATIZACIÓN Y DESALACIÓN TRIGENERATION WITH COMBINED CYCLE, HVAC AND DESLINIZATION
CARLOS IG. CUVIELLA SUAREZ
Año: Mayo 2008 Ver ejemplar Volumen: 83 Número: Mayo 2008 Editorial:
LA COLABORACION DYNA-UNIVERSIDAD
Tipo de Artículo: ARTICULO Sección: VARIOS Cómo referenciar este artículo
TRIGENERACIÓN CON CICLO COMBINADO, CLIMATIZACIÓN Y DESALACIÓN
RESUMEN Es patente la actual necesidad humana de buscar nuevas formas de generar energía útil y controlable de manera eficiente desde las ópticas de la economía y de la protección al medio ambiente. La tendencia actual de potenciar las energías renovables lo demuestra, pero no aporta la solución definitiva. Por eso, un paso fundamental en el ahorro energético es evitar el despilfarro y el consumo de energía innecesaria. La cogeneración, en todas sus variantes da respuesta a este planteamiento por medio de la utilización de la energía térmica generada en el proceso de producción de electricidad que tradicionalmente se vertía al foco termodinámico frío en la proporción aproximada de 2:1. El planteamiento es optimizar la gestión 0de energía térmica excedente de la producción de energía eléctrica para evitar el consumo de otros combustibles en diversos usos que abarcan la calefacción, la refrigeración, la desalación de agua, múltiples procesos industriales, etc. La difusión de estas implantaciones tendería hacia un ahorro general del 60% del combustible consumido [1]
TRIGENERATION WITH COMBINED CYCLE, HVAC AND DESLINIZATION
ABSTRACT The current need of mankind to seek for new ways of efficient usable controllable energy production from the economic and environmental points of view is obvious. The current trend towards renewable energies, states this fact though it is not the definitive solution. This is why a undamental step in saving energy is to prevent any misuse or unnecessary energy consumption. Co-generation, with all its variants, is an answer to this problem through the use of the residual thermal energy within electrical production as an usable product instead of as waste to be dissipated in a thermodynamic cooling process in an approximate ratio of 2:1. The basis of the approach is to optimize the management of thermal energy produced during electricity generation to prevent other fuel firing consumptions which can be assumed as heating, air conditioning, desalinization, industrial processes, etc. The profusion of tinstallations of this kind would imply a gross saving of 60% of the general primary fuel. Key words: Trigeneration, Combined cycle, Desalinization, multiefect distillation (med).